Knights Electrocom

Regulated 13.8V power supply, ideal to run any legal CB radio or accessory which requires up to 3A.

Electronic overload and short-circuit protection.

Regulated 13.8V power supply, ideal to run any legal CB radio or accessory which requires up to 3A.

Electronic overload and short-circuit protection.

(picture shows the 2A version, but the 3A is identical)

 

A range of good quality regulated power supplies at a reasonable price.

Ideal for running various transceivers and accessories.

All models are 13.8V output and have electronic short-circuit protection.

BEST BUY

A good quality regulated power supply rated at 10A constant with a 12A surge.

Ideal for running equipment up to 100W.

Electronic short circuit protection.

A good quality 5 Amp power supply, ideal to run any higher power radio or accessory which requires up to 5A.

Fixed 13.8V output.

Overload & short-circuit protection.

A good quality 15A power supply with built-in cooling fan.

Bananna sockets for high current output plus two sets of spring terminals for low current accessories.

Our most popular large power supply, ideal for powering HF radios and high power amplifiers up to 200W.

There are two large bananna sockets for high current output, plus two sets of spring terminals for lower power accessories.

Unlike the cheaper switch-mode power supplies, with this using a standard transformer there is no risk of RF interference.

• Variable output -  3-15V
• Voltage meter
• Current meter
• Thermostatically controlled fan
• Over current warning indicator
• Short circuit protection
• 150 x 145 x 300mm

A very heavy duty power supply, for powering HF radios and high power amplifiers up to 400W.

Twin meters show voltage and current.

Unlike the cheaper switch-mode power supplies, with this using a standard transformer there is no risk of RF interference.

• Variable output -  3-15V
• Voltage meter
• Current meter
• Thermostatically controlled fan
• Over current warning indicator
• Short circuit protection
• Heavy duty terminals
• 205 x 157 x 335mm

A new stylish 28A linear power supply with digital meters for Voltage and Current.

Unlike most new power supplies this uses a traditional transformer rather then being "switch-mode".

Below are a new range of high quality switch mode power supplies, ranging from 10A to 60A.

All are highly filtered to eliminate RF interference and are especially designed for use with radiocommunication equipment.

A high quality convection cooled switch mode power supply with a maximum output current of 10A continuous (12A max surge).

Output terminals on rear & cig socket on front.

A high quality convection cooled switch mode power supply with a maximum output current of 23A continuous (25A max surge).

A high power switch mode power supply with variable voltage, twin digital meters, and maximum output of 25A.

A compact switch-mode power supply with twin analogue meters and variable voltage.

This psu is designed to supply a maximum of 30A continuously with a 35A surge.

The main power outlet connectors are on the back, with additional spring connectors on the front for maximum 3A output, plus a standard cig lighter socket.

The voltage can be either variable or fixed (switch on rear).

A compact switch-mode power supply with twin analogue meters and variable voltage.

This psu is designed to supply a maximum of 50A continuously with a 55A surge.

The main power outlet connectors are on the back, with additional spring connectors on the front for maximum 3A output, plus a standard cig lighter socket.

The voltage can be either variable or fixed (switch on rear).

A compact switch-mode power supply with analogue meter that can display voltage or current.

Specifically designed for use with radio equipment, with tunable "noise filter" on front panel.

Variable voltage 8-15V, or fixed at 13.8V (switch on rear of psu).

• variable or fixed voltage
• 30A terminals on rear
• cig lighter socket on front (10A max)
• spring terminals on front  (3A max)

A high power switch mode power supply with variable voltage, twin analogue meters, and maximum output of 40A.

A high power switch mode power supply with variable voltage, twin digital meters, and maximum output of 40A.

Same as above but with digital meters.

A high power switch mode power supply with variable voltage, twin digital meters, and maximum output of 60A.

Rear mounted terminals give a maximum 60A output,  the easy access front sockets are ideal for accessories up to 5A.