Original mounting bracket for a tti TCB-550.
Also suitable for the Midland 38, Midland 98, and any other radios the same size.
Fits radios approx 125mm (5") wide.
An original rig bracket to fit the Midland 77-099 and 77-104 radios.
This does not fit the new 80 channel midlands.
Size: 117mm.
We now stock a range of 12 different size DIN adapter brackets to suit most makes and models of CB.
Ideal for trucks etc which have a spare radio size hole in addition to their normal radio slot.
Includes all hardware required to fit the bracket to your radio.
All metal construction.
A new range of DIN adapters to allow you to fit a CB neatly into a standard DIN (radio) slot.
These are made by tti for their range of radios, but they do fit other makes and models and are better priced than other makes.
Fits tti, Midland, Intek and other popular radio.
A universal bracket which will fit most radios. The bracket slides open/closed to adjust to almost any width.
Supplied with "runners" that can be attached to the side of your radio for quick removal, alternatively you could just use the holes in the side of these brackets to fit your radio as normal.
Original rig bracket suitable for the Cobra 148 and Superstar 2000 radios. May suit some other large multimodes.
Size: 206mm
Enables the quick removal of your radio from your vehicle, and if you use several vehicles or radios it allows you to easily swap radios between vehicles.
This is a full size version with a full set of connectors - for power, speaker and antenna. All connections are using "spade" terminals - so you can use as many or as few as you like (max 6 plus antenna).
You need to either fix your normal mounting bracket to the slide mount, or drill holes in the casing of your rig and attach the slide mount directly.
Size: 15cm wide x 19cm deep (approx, inc handle).
This is a smaller size version but still with all connections fitted - for power, speaker and antenna.
Ideal size for most of the newer more compact radios.
Size (radio half): 10cm wide x 9cm deep (approx).
Original replacement bracket for a President Lincoln or Uniden 2830.
Expensive - but it is the only one which will fit correctly.
A cheap replacement rig bracket - the only problem is we have not yet found a radio it will fit!
Size: 173mm (approx 7 inch)
Large plastic replacement thumb screws. Price is per pair.
Available in 4mm, 5mm, and 6mm thread.
** 6mm back in stock**
Please Note: these have all been packed loose in big bags and we are finding that most look "used" with rubbing against each other!
Smaller all metal replacement thumb screws. Price is per pair.
