A range of replacement 12V power leads to suit many types of CB & Amateur radios.
All come supplied with in-line fuse holder and fitted fuse.
Popular replacement power lead to suit most Cybernet boarded radios.
Examples include: Harrier, Rotel, Harvard, Radiomobile etc
Very slightly larger than the 2 pin round, this was used in just a few radios such as the Communicator.
The 2 pin round will actually fit these radios, so if in doubt get the rounded one.
A popular 3 pin power lead, with 2 of the pins closer together to prevent you plugging it in wrong way around.
Available as standard (for standard FM CB's) or heavy duty (7A) for multimode radios.
Examples include: Uniden, Audioline, Cobra, etc
A popular 3 pin power lead, with clip on side.
Examples include: older Midlands, Maxcom, Commtron, etc
A small power lead with 1 round and 1 square pin.
Fits: some Amstrads, Mustang, Pama.
On some radios we find that the clip is too "thick" and you may have to shave a little off the side of the clip to make it clip in.
These power leads/sockets are notorious for being a loose fit, especially once the radio gets a few years old.
Replacement power lead to suit most Midland radios plus a few other makes.
Examples include: Midland 77-104, Midland 78, Midland 48, etc
An unusual power lead because it has 3 wires rather than 2. There are normal live and earth wires, plus a memory wire (permanent live).
The only radios I know that use this are the Maxon MX1000 and MX2000, but there are probably others.
A larger 2 pin power lead with a clip on the side.
These were mainly used on the Delta 4000 and Skiptech 4000 radios, but I'm sure there's some other radios that use them.
Very similar to the Midland power lead but slightly larger.
Replacement original power lead for the Maxcom 7E portable CB.
Comes complete with a fiited fused cig plug.
Any 10 x Power Leads
A mix of any 10 of the above power leads (any priced at £1.95 each).
Just note which leads and the quantities in the box provided on the right.
Original replacement power lead for tti radios.
Fits TCB-550, TCB-660, TCB-770 and TCB-880.
A heavy duty power lead for various Albrecht and Magnum 10m radios.
Fits: Albrecht AE485, Magnum 257, Magnum DeltaForce, etc.
A heavy duty power lead which fits many of the Yaesu, Kenwood, Alinco, and Icom VHF/UHF radios.
Supplied with twin fuse holders with 15A fuses fitted.
A heavier duty version of the Albrecht/Magnum lead.
Original replacement power lead for Superstar 3900EFT.
6 pin power plug with heavy duty twin fused lead.
Note: this only fits the EFT model, others use 3 pin.
A replacement 12V power cable which fits many of the Kenwood and Icom HF radios. 6 pin plug.
Supplied with heavy duty cable, twin fuse holders and 20A fuses.
A replacement 12V power lead for HF radios which use a 4 pin plug (eg IC-7000).
An extension 3 pin power lead with fitted fuse holder.
This has a male plug on one end and a female socket on the other.
You can cut this in half to make up a quick disconnect lead for radios that have a fixed power lead?
A replacement power leads for radios where the lead is wired directly into the radio.
Approx 1.5m long with a fitted fuseholder and 3A fuse.
A fused cig plug fitted with a curly lead and supplied with 6 popular connectors.
The connectors include a 3.5mm jack plug and 5 different size bore plugs, to suit most radios etc.
Connectors simply plug in, and can be reversed to give correct polarity.
A 3-piece double adapter for a standard cigarette lighter socket.
Has the advantage over the 1-piece version of being more flexible if the cig lighter is in an awkward position.
A double cigarette lighter socket on approx 1m of cable with a cig plug on the end.
Supplied with a mounting bracket and double sided sticky pad.
The sockets have blanking covers for when not in use.
Note: latest delivery is silver/grey rather than black.
A 4 way cigarette lighter socket on approx 4ft of cable with a cig plug on the end.
Three of the sockets are designed for use with accessories up to 2A each, the 4th socket is designed to plug the cig ligher into. Maximum total output 10A.
A 3-LED indicator shows battery status.
Supplied with mounting bracket.
A complete cig lighter socket kit for fitting in your car (or anywhere else).
Comes complete with a push in cig lighter.
A cigar lighter socket with a short lead fitted with crocodile clips.
Clips onto your car battery to allow accessories with a cig plug fitted to be used.
